Archive of the Boot diskette for HP 4145A Semiconductor Analyzer

The boot archive was created using ImageDisk (see http://www.classiccmp.org/dunfield/img/index.htm for details)

Note:  Diskette format is single sided, single density which is not supported for writing on most modern PC floppy disk controllers.


If replacing the drive with a HxC2001 disk emulator you need to jumper pins 5 and 6
of the floppy connector on the HxC2001 board in order to get the correct drive ready/disk change
signal


Wayne Knowles   
w.knowles@xtra.co.nz
